Price Match - Free Shipping
Call Now: 800 343-4601
CalTrend

CalTrend Seat Installation

Jump to:
  1. If applicable, remove headrest. Slide the upper backrest cover over the seat frame until it fits snugly. Make sure the back pouch is facing towards the back.

  2. Match corner seams with the original seat seams.

  3. If applicable, match the coverís cutouts with the various switches and levers found on the seat. Tuck spare fabric under the headrest holes at the top of the seat.

  4. From the front, guide the remaining material with Velcro between the space dividing the upper and lower parts of the seat. To ensure a snug fit, pull the remaining material from the back.

  5. Stick the Velcro together, the bottom fitting under the top.

  6. Slide the bottom seating cover over the seat, starting from the front towards the back.

  7. Align the corner seams of the cover with the seams of the seat. Tuck the overhanging material into the space dividing the seat and the base. If applicable, match cover cutouts with the various switches and levers found on the seat.

  8. From the front, guide the excess material and straps between the space dividing the upper and lower parts of the seat. To ensure a snug fit, pull the remaining material from the back.

  9. Have the front straps come under the seat towards the back, resting on the first metal bar below. Place the ends of the straps through the buckle straps on both sides. Tighten well for a snug, immovable fit. (Note: According to individual carís Make and Model, the buckle may come from the front or the back.)

  10. If applicable, slide the headrest cover over the headrest. Make sure the seams from the cover line-up with the seams of the headrest.

  11. Stick the Velcro together.

  12. Put the headrest back on the top of the seat.

  13. Enjoy your new CalTrend Custom Seat Covers!